Installation
============

The installation may include (whenever applicable):
- SDK libraries
- Programming examples
- Documentation
- End User Applications

After installation a reboot is recommended.

Before Connecting Your Camera
=============================

GigE Vision Cameras
-------------------

For best performance:
- Connect the camera directly to a Gigabit Ethernet adapter whenever possible.
- Use Cat5e or better Ethernet cables.
- Ensure the network adapter is configured appropriately for your application.
- Disable Wi-Fi if automatic network configuration interferes with camera discovery.
- A GigE network adapter that supports jumbo frames is recommended.
  Concerning performance and reliability we made best experiences with the on-board network adapter.
  Although the IC Imaging Control SDK software will work with any GigE network adapter, we recommend to use on-board adapters.

USB3 Vision Cameras
-------------------

- Connect the camera to a native USB 3.x port.
- Avoid unpowered USB hubs.
- Use certified USB3 cables for reliable operation.

Camera Discovery
================

After installation you can verify operation by launching:
The application can be found in:
Applications/IC Capture/
If no camera is detected:
- Verify all cables are connected.
- Power-cycle the camera.
- Check network or USB connections.
- Restart the viewer application.

Sample Applications
===================

Example applications are available on GitHub:
https://github.com/TheImagingSource/ic4-examples 
These provide a good starting point for application development.

Support
=======

For technical assistance, please contact:
support@theimagingsource.com 
or visit:
https://www.theimagingsource.com/en-de/support/ 
Please include:
- SDK version
- macOS version
- Camera model
- Camera firmware version
- Description of the issue

Copyright
© 2026 The Imaging Source Europe GmbH. All rights reserved.
